Filter By:
Hubs
$21.99
Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings.
- Double contact sealing
- Super polished bearing races for low-friction rolling
$26.99
With Center Lock disc rotor mounting, the quick release HB-MT400 front hub offers stiffer wheel rigidity, smooth rotation, and less drag.
- 100 x 15mm front E-THRU axle
- Stiffer wheel rigidity
- Quick and easy assembly
- Hole count: 32h
$31.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts.
- Double contact sealing
- Super polished bearing races for low friction rolling
- 6-bolt ISO disc mounting surface
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling.
- Internal O-rings and grease sleeve
- High quality, sealed Cup & Cone Bearing
- High durability and smooth rolling for sustained performance
$33.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology.
- The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring
- Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
$47.65
- Aluminum hubs
- Loose ball
- Bolt-on
- Axle: B/O 3/8
- Material: Aly
- Color: Blk
- Brake Type: 6B
- OLD: 170mm
$56.99 - $75.99
Shimano XT FH-M8010/M8000 Rear Hubs.
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Shimano Quick-engagement freehub
- Not compatible with Shimano 11-Speed Road cassettes
- Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability
- Center Lock disc brakes provide reliable braking power (lockring sold separately)
$67.99
The Shimano HB-MT900-B front hub for Center Lock disc brakes provides faster acceleration by reducing inertia and weight.
$69.00 - $85.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
$70.99
With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with spline mount and lock ring
- Toolless 15mm thru axle system optimizes rigidity and weight
- Simple setup and reliable trail performance
- Hole Count: 28
$74.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 110mm forks
- Flange diameter: 58mm
- NDS flange offset: 25.5mm
- DS flange offset: 37.75mm
- 28 hole, 6-bolt rotor
$74.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 100mm forks
- Flange diameter: 58mm
- NDS flange offset: 20.5mm
- DS flange offset: 32.75mm
- 28 hole, 6-bolt rotor
$76.90
The new standard for durability and price.
- Contact-free seals and high precision build guarantee smooth bearings
$79.99
The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards.
Features:
- 7075-T6 aluminum hub shell
- 6903RS sealed cartridge ball bearings
- Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life
- 17mm 7075-T6 aluminum axle with steel helicoil thread inserts
- 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot
- Weight: 11.2oz
- Replaceable plastic hub guards included
$80.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, this front hub is perfect for custom MTB wheel builds. It features XTR-level innards for premier function with long service life, all while remaining fully serviceable.
- Hole count: 28
$83.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes
$92.00 - $109.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
$99.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 150mm forks
- Flange diameter: 58mm
- NDS flange offset: 45mm
- DS flange offset: 53.5mm
- 32 hole, 6-bolt rotor
$125.00 - $143.00
High quality sealed bearing hub is available in traditional and modern configurations.
- Steel axle, aluminum end caps with steel knurled contact surfaces
- Same proven driver mechanism as higher priced models
- Spoke Interface: J-Bend
- Hub/Brake Compatibility: 6-Bolt Disc
- Skewer Included: No
- Bearing Type: Sealed Cartridge
$144.99
Shimano Alfine Center Lock Dynamo Front Hub
- Compatible with 26 to 28-inch wheel sizes
- Light alloy QR lever and nut
- 6V, 3.0W output
- Centerlock rotor mount
- Spoke Interface: J-Bend
- Weight: 575g
$144.99
- Aluminum Hub Shell
- Over Locknut: 100mm
- Stainless Steel Ball Bearings
- Spoke Hole Circle: 38mm
- Center to Flange (Right): 37mm
- Center to Flange (Left): 37mm
- Average Weight: 203g
$149.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Rapid Drive 54 hub quickly and efficiently transfers effort into forward momentum
- Wheels are upgradeable to 108 points of instant engagement
- Bontrager rear hub for use with 148mm dropouts
- Flange diameter: 58mm
- NDS flange offset: 35.5mm
- DS flange offset: 21.5mm
- 28 hole, 6-bolt rotor
$149.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Rapid Drive 54 hub quickly and efficiently transfers effort into forward momentum
- Wheels are upgradeable to 108 points of instant engagement
- Bontrager rear hub for use with 142mm dropouts
- Flange diameter: 58mm
- NDS flange offset: 32mm
- DS flange offset: 18.5mm
- 28 hole, 6-bolt rotor
- Equipped with Shimano/SRAM freehub body, SRAM XD available separately
$162.99
- Aluminum Hub Shell
- Super polished Bearing Races
- Over Locknut: 120mm
- Stainless Steel Ball Bearings
- Contact Sealing: Dust Cap
- Average Weight: 298g (w/o lockring)
$174.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels.
- New internal unit construction is 28g lighter than DH-T8000-3D
- More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000
- Angular contact bearings
- Compact & lightweight
- Low rotational resistance
- Durable sealing performance
$179.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds.
- Traditional flange
$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available
$189.99
The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design.
- New internal unit construction is 28g lighter than DH-T8000-3D
- More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000
- Proper positioning with 12mm E-THRU
- Angular contact bearings
- Compact & lightweight
- Low rotational resistance
- Effortless setting of disc rotor
- Durable sealing performance
$191.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds.
- Hole count: 28
$199.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high quality wheelset.
Product details
- Bontrager rear hub for use with 197mm dropouts
- Rapid Drive 108 hub instantly transfers effort into forward momentum
- Flange diameter: 58mm
- NDS flange offset: 59.5mm
- DS flange offset: 46mm
- 32 hole, 6-bolt rotor
Page 1 of 2
Next page