Parts

Original equipment replacement parts. - For use with Speed Concept or Madone Speed - For specific compatibility concerns, please contact our Customer Service team

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings. - Bearing Type: Cartridge - Weight: 117g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Once again, SRAM pushes the envelope with their Powerdome X XG-1090 10-Speed Cassette. Light, stiff, quick, and quiet thanks to the ultra-strong, hollow, one-piece design and StealthRing elastomers, this cassette is worthy of even the nicest road machines. SRAM has added elastomer rings between every cog to provide a 'bed' where the plates of the chain interface with the cog. These elastomer StealthRings make for whisper-quiet operation. It's light, too, with the small 11T cog separate, and the remaining 9 cogs milled from a solid block of tool-grade steel pressed onto a single aluminium cog (the largest one). And, to REDuce even more weight, excess material in the space between each cog is milled away.

SRAM's 1070 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.

The Calibur cranks feature a hollow 22mm 48 spline spindle and includes a sealed bottom bracket. - LHD/RHD compatible - Bore: 22 - Spindle Material: Steel - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Mid - BB Included: Yes

- Series: SLX - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 145.6g

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- Drivetrain Speeds: 11 - Chainring BCD: 110 Shimano Asymmetric - Material: Aluminum

Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket lets your SRAM GXP crankset (sold separately) spin effortlessly without weighing you down.

The SRAM NX crankset provides high performance at the right price. Featuring the SRAM engineered X-SYNC chainring, the NX crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. Personalize your gearing with five available chainrings. - 6000 series aluminum arms - BOOST 148 compatible - Fully compatible with all SRAM 1x drivetrains - Arm Material: Aluminum - Chainring Material: Aluminum - BCD: 94mm - Weight: 680–780 grams - Interface: 24mm *Bottom bracket sold separately

Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy

Shimano's groundbreaking 6800-series front derailleur delivers a shorter stroke at the lever and substantially lighter action for lightning fast shifts with just a flick of your finger. The redesigned pull arm offers more direct tactile feedback during shifts. The derailleur support bolt creates more solid contact to the frame, stiffening the derailleur and stabilizing it for faster, smoother shifts.

SRAM's 1050 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.

The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. The single compound grip with flange secures and protects the hand so athletes can focus on the road. Single Compound Grips include push-in plugs. - Length: 140mm - Weight (with plugs): 134 grams - Diameter: Medium (32mm)

- 30.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 27 grams per set - Includes plugs and double sided tape

The MacAskill Signature grip is now available in a Single Compound grip. This grip has a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration damping. Designed by Danny MacAskill! Single Compound Grips include push-in plugs. - Length: 136mm - Weight (with plugs): 88 grams - Diameter: Small (29mm)

Experience what so many cyclists are using, the Logo grip. It satisfies many riders providing durability. This is a great grip for those with medium-sized hands. Lock-on grips include the grips, clamps, screws, and plugs. - Length: 130 mm - Weight (with plugs): 120 grams - Diameter: 31.5 mm

• CNC machined in British Columbia, Canada • S.H.I.F.T technology features sloped ramps, profiled teeth and pins • AL7075-76 rings with hardwearing steel ramps • Black machined and anodized

Kool-Stop's Campi 2000 insert pad was designed to fit Campagnolo systems made after the year 2000. Features: - Patented Plow Tip - Water Grooves - Dove Tail fit - Rim Friendly - Replacement pads for Campagnolo 10-speed groups Black: standard compound designed for dry condition riding Dual: combination of Salmon and Black compounds for more controlled, smoother stopping Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

JJ Palmere's signature pedals are made of an impact resistant nylon blend featuring Primo logo end caps, unsealed bearings and chromoly spindles. Specifications: Size: 9/16" Weight: 13.6oz

XX1 Eagle AXS utilizes the proven backbone of SRAM 1x. With the lightest weight materials and a 500-percent gear range and a more secure and longer wearing X-SYNC2 chainring, it's the pinnacle of performance. XX1 Eagle AXS: Ready for the new generation of XC super bikes. Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. Groupset includes: - DUB BOOST Crankset w/ Direct Mount 34T chainring - Rear Derailleur w/ Battery - Shifter w/ Clamp - Rainbow Chain 126 links - XG-1299 Cassette 10-50T - Charger, Cord - Chaingap Gauge

- High performance compounds recommended for all-conditions - Steel backing

Organic brake compound with aluminum back plate. Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

These are excellent replacements for vintage Modolo brake shoe holders. Exact fit! No trimming needed. Use black for the most authentic look, or salmon for best all-weather braking. Premium quality for original restoration projects and everyday use. Sold in sets of four. Features: - Exact fit - 2 Pairs/4 Pads - Brand new, not old stock Compounds: - Black - Standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon - One of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.

Replacement pads for the popular Magura HS33 and HS11 brake systems. Features rim-friendly compounds: - Black - Standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon - One of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Dual - A fusion of black and salmon compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! - Electric- This compound is formulated specifically for the higher speeds and weights of electric bicycles. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Trials - An extreme compound for only experienced trick or trials riders needing a compound that will instantly lock the wheels.

The Shimano GRX BL-RX810-L brake lever offers greater rider control for mixed terrain riding thanks to Shimano's category-leading hydraulic disc brakes. Gravel-specific ergonomic shape provides more control on bumpy terrain. - Gravel-inspired lever and bracket ergonomics - Anti-slip brake lever - Greater mixed-terrain control - Designed to be used with a 1x gear setup

The Shimano GRX BL-RX812 in-line brake lever delivers greater rider control for mixed-terrain riding thanks to Shimano's category-leading hydraulic disc brakes. The hydraulic disc sub brake lever offers reliable and accessible braking in more positions and allows for quick access while riding upright on the tops of the handlebar. - Quickly brake when riding upright - More confident and accessible braking from multiple positions - Less fatigue on long tours

The pad that started it all. The International pad was the first pad produced by Kool-Stop and it's where they got their name. Available in both black and salmon compounds. Sold in pairs/ 2 pcs. Features: - Alloy cooling fins - Anodized high gloss finish - Sold in pairs/ 2 pcs. - Rim Friendly Black Compound - Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. Salmon Compound - Kool-Stop's most famous Salmon compound is also one of their most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.

HS-33 Pro is a Kool CNC machined holder with Kool-Stop's trick trials insert installed for professional Trials riders. Features rim-friendly compound: - Pro Trials Sticky - An extreme compound for only experienced trick or trails riders needing a compound that will instantly lock the wheels.

Kool-Stop's sleek, lightweight cross pad with their triple compound technology is a great choice for competitive cross bike racers. Features: - Forged Alloy Holder - Triple Compound - Lightweight Design Specifications: - Overall length: 54.5 mm - Pad contact width: 7.5 mm

The Dura 2 Advanced Holder is a forged aluminum holder with dual pivot adjustment that houses Kool-Stop's Dual Compound Dura Type insert. These holders will fit most Shimano/SRAM type brake systems. Features: - Aluminum Holder - Water Grooves - Dual Pivot Adjustment - Dual Compound

The Koda was refined through two years of feedback from female testers and has evolved into a saddle that even the boys at the office are fighting over. This saddle boasts all-day comfort and a shape that everyone can enjoy. - All-day comfort with a generously open channel dividing supportive outer zones to alleviate pressure on your sensitive bits - Short nose provides seamless on-off transitions while a slightly swooped shape provides an adequate tail to brace against - Titanium rails

The Silverado is one of WTB’s most iconic and revered saddle shapes. Lightweight and slim, the design oozes speed while proving to be incredibly comfortable. Ride a Silverado and you’ll quickly know what everyone’s raving about. - Long, tapered nose and flatter platform provide ample real estate for shifting positions - Optimized padding-to-weight ratio make the Silverado a hit across all disciplines, including road - Titanium rails

The Rocket is an incredibly versatile saddle. From a two minute hair-raising downhill to a 2700-mile individual time trial, this saddle is the top choice for those pushing the sport. - Narrow nose and midsection means no chafing during long pedaling sessions - Thick padding and a swooped tail allow riders to lock in their ideal position for power and comfort - Titanium rails

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. Mated to a HYDROR brake lever is a DoubleTap 11-speed shift lever, built to provide accurate shifting that you can rely on no matter where you ride. - SRAM Road ExactActuation 11-speed compatible - Uses DOT 5.1 brake fluid - Caliper available in both 74mm and Flat Mount versions - Lever body design offers excellent finger wrap, comfort and control - Easily converts between 160mm and 140mm rotors with adaptor brackets - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

Get a grip…or two! Grips are a key point of contact between you and your bike. - Fun and fashionable Electra lifestyle grips help to personalize your ride - Set of two grips - Length: 90mm - Diameter: 20mm - Material: Kraton Rubber

Enjoy the ride with SRAM's 3.0 Front Derailleur. It provides crisp, precise front shifts for fast, smooth, and reliable shifting season in and season out.

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

SRAM's Chain Spotter fits on your seat tube beneath your front derailleur to keep the chain from coming off, which keeps you riding and prevents chain and frame damage, too. It's made of lightweight aluminum and includes all mounting hardware. Just bolt it on and go. No front derailleur fine-tuning needed.

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

When you're going fast, you need to hold on to something. SRAM's DH Silicone Locking Grips have you covered with clamps on both ends for a secure bar hold. Their rubber surface with thumb donut and "S" logo design offer a great feel.

SRAM's Comfort Grips are made of compliant rubber in an ergonomic shape for excellent support and comfort. They have stylish SRAM logos and are built to stick tight on the handlebars and last.

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - For Super Boost+ cranks - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Replacement hoods for SRAM hydraulic shifter/brake levers.

SRAM's Force 22 Hydraulic Brake and Brake Lever is descended from their top-end RED road group and offers precise braking and shifting performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM Force 22 shifters are designed to work with 11-speed cassettes. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again! Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style.

Explore the most challenging routes on the newest crop of versatile and fun drop-bar bikes with the SRAM Force 43/30T wide crankset. Shifting is smooth, accurate, and dependable using our proven X-Range gearing based around a tight, 13T difference between the small and big chainrings. The wider stance of the chainrings expands 2x drivetrain bike capabilities by providing clearance for fatter tires. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Crisp and accurate front shifts - Wide chainline crankset for bikes with up to 700c x 45 or 27.5 x 2.1" tire widths (43/30 chainrings only) - Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands - Requires Force Wide front derailleur - DUB bottom bracket adds durability and simplicity

SRAM pioneered the 1x drivetrain, and the SRAM Force 1 crankset evolves the innovation. It’s lighter, stronger, and simpler—non-aero chainrings can now be installed with a single tool. For cross, TT, tri and crits, this is the king of 1x. - Single-ring drivetrain simplifies functionality and reduces weight - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Can be upgraded to a power meter

The SRAM Force 1 AXS crankset offers a superior 1x drivetrain experience with simplified functionality for a variety of riding disciplines. The crankset is designed specifically for electronic shifting and can be upgraded to a power meter. The Force 1 Crankset evolves the innovation of the 1x drivetrain. The single-ring drivetrain simplifies functionality, reduces weight, and can be upgraded to a power meter. It utilizes X-Sync narrow-wide tooth technology to provide maximum chain control during the ride. Chainrings can be installed with a single tool, making gearing changes a breeze. It’s lighter, stronger and simpler, making it a go-to choice for cross, time trial and triathlon. - Single-ring drivetrain simplifies functionality and reduces weight - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Carbon crank arms and aluminum chainrings are lightweight - Can be upgraded to a power meter - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - DUB bottom bracket (not included) adds durability and simplicity - Number of Chainrings: Single - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs < 415 mm Chainstay - Crank Length: 170mm - Crank Intended Use: Road, Tri, Cyclocross - Pedal Spindle: 9/16" - Rings: 44 - Spindle Interface Type: SRAM DUB - Drivetrain Speeds: 12 - Chainring BCD: 107 - BB Included: No

Incredibly fast, buttery smooth and impressively precise gear changes are here with SRAM's Force Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.

SRAM's Ferrule Kit is just the thing to keep on hand for your brake- and shift-cable replacement and repairs. You get 10 4mm-diameter aluminum shift ferrules, 6 5mm-diameter aluminum brake ferrules, plus 3 aluminum cable crimps to prevent frayed cables.

SRAM's Force 22 Front Derailleur gives you the freedom to shift with incredible speed into either chainring. Experience precision shifting with YAW technology that allows the cage to rotate to better align with the chain and eliminates the need for shifter trim. An integrated chain spotter is included for seriously bumpy roads and cyclocross action. Paired with SRAM's X Glide R chainrings, unmatched front shifting will be the norm on your bike.

Designed for the most discerning, performance obsessed riders, SRAM's GX 2x11 Rear Grip Shifter features weight-saving construction and delivers outstanding speed and precision. SRAM's X-Actuation gives you precise and dependable 11-speed performance. This right-side rear shifter is compatible with SRAM's GX 11-speed derailleurs and cassettes. • Full metal, 11-speed indexing keeps shifting crisp and precise with Grip Shift • Three rows of ball bearings provide zero friction or play—reducing the force needed to shift and promoting long-term performance under all weather conditions with Grip Shift • Once the Grip Shift shifter and grip interlock securely, forged aluminum clamps on either end reinforce the assembly by locking tightly to handlebar • Weight: 144 grams

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. The power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Get sharp, dependable X-Actuation shifting with SRAM's GX 2x11 Rear Trigger Shifter. This right-side rear shifter is compatible with SRAM’s 2x11-speed components, offering precise, swift shifting across their wide-range 11-speed cassette. • Dedicated 11-speed rear trigger shifter • Multi-position mounting • Discreet clamp • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams