Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Rims

Bontrager Trail Tubeless Rim Tape
$9.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel
Bontrager Cross-Country Tubeless Rim Tape
$14.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel
Bontrager AT-850 26-inch Rim
$29.99
• Original equipment Bontrager AT series rims • Double wall construction • Disc brake compatible • Pinned seam • Presta valve • Aluminum • 32 holes
Bontrager Camino Rim (700c)
$29.99
- Original equipment replacement Bontrager Camino rim - Schrader valve - 36 spoke holes - Aluminum
Bontrager Approved Disc TLR Rim
$34.99
- Size : 700c - Model : Bontrager Approved TLR Disc - Holes : 24 - ERD : 598mm - Color : Black - Finish : Anodized - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Dual - Rim : Symmetric - Weight : 525g
Bontrager Approved TLRRim
$34.99
Size : 700c Model : Bontrager Approved TLR Holes : 24/32/36 ERD : 598mm Color : Black Finish : Anodized Type : Tubeless/Clincher Valve : Presta FT/RR/PR : Dual Rim : Symmetric Weight : 525g
Bontrager Nebula Rim
$34.99
- Original equipment replacement rims for Bontrager Nebula wheels - Pinned Seam - Presta Valve
Bontrager Race Lite Rim
$59.99 - $79.99
- Original equipment replacement rims for Bontrager Race Lite wheels - Welded Seam - Presta Valve
Bontrager Race TLR Rim
$69.99
- Size : 700c - Model : Race - Holes : 24 - ERD : 596mm - Color : Black - Finish : Anodized - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Rear - Rim : Asymmetric - Weight : 465g
Bontrager Duster Rim
$79.99
- Original equipment Bontrager Duster rims - Tubeless Ready Design - Optimize with Bontrager TLR Tire Sealant, Tubeless Ready rim strips, valve stems, and tires - Welded seam - Presta valve
Bontrager Mustang Disc Rim
$79.99
- Original equipment replacement Bontrager Mustang rims - Tubeless Ready Design - Optimize with Bontrager Super Juice, Tubeless Ready rim strips, valve stems, and tires - Welded Seam - Presta Valve
Bontrager Race XXX Lite 29-inch Rims
$84.99
- Original equipment replacement rims for Bontrager Race XXX Lite wheels - Aluminum - 29-inch - 28 spoke holes
Bontrager Line Elite Rim (27.5-inch)
$99.99
- Original equipment replacement rim for Bontrager Line wheels - 28mm inner hook bead width - 28 spoke holes - Tubeless ready design - Optimized with Bontrager TLR sealant, TLR rim strips, valves, and tires - Welded seam - Presta valve - Aluminum
Bontrager Line Elite Rim (29-inch)
$99.99
- Original equipment replacement rim for Bontrager Line wheels - Tubeless ready design - Optimize with Bontrager TLR sealant, TLR rim strips, valve stems, and tires (all sold separately) - Welded seam - Presta valve - 28 spoke holes - Aluminum
Bontrager Race X Lite Rim
$119.99 - $139.99
- Original equipment replacement rims for Bontrager Race X Lite wheels - Welded Seam - Presta Valve
Bontrager Line Plus Rim (29-inch)
$199.99
- Original equipment replacement rim for Bontrager Line wheels - Tubeless ready design - Optimized with Bontrager TLR sealant, TLR rim strips, valve stems, and tires (all sold separately) - Welded seam - Presta valve - Aluminum
Bontrager Rhythm Elite Rim
$199.99
- Original equipment replacement rims for Bontrager Rhythm wheels - Tubeless Ready Design - Optimize with Bontrager TLR Tire Sealant, Tubeless Ready rim strips, valve stems, and tires - Welded seam - Presta valve - Model : 2014 Rhythm Elite - Holes : 28 - ERD : 535mm - Color : Black - Finish : Anodized - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Dual - Rim : Asymmetric - Weight : 470g
Bontrager Jackalope Rim (27.5-inch)
$249.99
- Original equipment replacement rims for Bontrager Jackalope wheels - 32 spoke holes - Presta valve - Aluminum
Bontrager Rhythm Pro Carbon Rim
$499.99
- Original equipment replacement rims for Bontrager Rhythm wheels - Tubeless Ready Design - Optimize with Bontrager TLR Tire Sealant, Tubeless Ready rim strips, valve stems, and tires - Welded seam - Presta valve - Model : 2014 Rhythm Pro Carbon - Holes : 28 - Color : Black - Finish : Nude - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Dual - Rim : Asymmetric - Weight : 400g
Bontrager Aeolus 3 D3 Tubular Rim
$649.99
- Size : 700c - Model : AEOLUS 3 D3 - Holes : 18 - ERD : 569mm - Color : Black - Finish : Nude - Type : Tubular - Valve : Presta - FT/RR/PR : Front - Rim : Symmetric - Weight : 350g
Bontrager Aeolus 9 D3 TLR Rim
$849.99
- Size : 700c - Model : Aeolus 9 D3 TLR - Holes : 18 / 24 - Color : Black - Finish : Nude - Type : TLR/Clincher - Valve : Presta - Rim : Symmetric (front), Asymmetric (rear)
GSport Rollcage Rim
$79.99
If the Ribcage is too rich for your blood, the Rollcage is its more affordable sibling. Using the same proven shape and cross-over-lacing to create a really strong wheel, but industry standard 6061-T6 alloy and no ribs drops the price considerably. While the Rollcage is the lesser expensive, it is still an excellent rim, with the same super tough sidewall and bead profile its the lightest rim we make at 450 grams. You will recognize the rims by their outer shape, but the Rollcage is actually 2mm narrower and easily identified by the groove in the middle of the inner wall. We offer rims in HARD anodized finishes rather than the decorative anodizing used by most companies. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 450g / 15.9oz - Weight (Chrome Plate): 490g / 17.3oz - Width: 34mm ERD: 389mm
GSport Ribcage Rim
$174.99
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389
Mavic CXP Elite
$49.95
Mavic's CXP Elite offers a 21mm aerodynamic pin-joined profile, along with eyelets around each spoke hole to enhance its durability. Weight: 510 grams
Mavic Open Elite
$49.95
As a proud descendant of MA2, MA40 and MA3, Mavic’s Open Elite is the perfect blend of successful Mavic rim features. It balances durability, weight, and price to provide you with a road riding experience that has all you need and nothing you don’t.
Mavic Open Pro C
$79.95
One of the most celebrated rims in the history of road cycling, Mavic’s Open Pro remains the example to which high-end aluminum road rims are compared. Its design is tried and true, and its Maxtal material delivers a perfectly balanced strong, rigid, and lightweight wheel build. It also features Mavic’s Soudé Usiné Process (SUP), a process by which the rim is arc welded and machined smooth, resulting in a stronger rim joint and better rim balance, as well as smooth, shudder-free braking. Ride a pair of Open Pros and you’ll understand why so many experienced riders swear by them. - Clincher
Mavic A 719
$84.95
Featuring the most renowned Mavic technologies, the A 719 is the benchmark rim for the trekking and touring market. This rim is SUP-welded and features wide, UB Control machined braking surfaces for enduring strength and control in the roughest road conditions.
Odyssey Quadrant Rim
$39.99
The QUADRANT uses a unique pinned junction design that allows Odyssey's lightest rim to also be their most affordable. With its offset spoke drilling, this rim is stronger than its weight suggests. The Quadrant is one of the few pinned rims that receives regular and unquestioned use by pro level riders. SPECS - 6000 series aluminum - Width: 34mm - Height: 18mm - ERD: 392mm - 36-H - 20 inches - 420 grams (14.8 oz)
Odyssey Litehouse Rim
$59.99
The Odyssey Litehouse Rim is both light and strong, with super-thick angled sidewalls to minimize the risk of damage when you hang up. The rim features a wider cross-section than normal to compliment modern tire widths. Designed as a semi-brakeless rim that can be run front or rear. When brakes are used, be sure to adjust the pads so they avoid making contact with the tire’s sidewall, as usual. Features: - Precision welded joint - 6000 series aluminum Specs: - Width: 35mm - Height: 21mm - ERD: 388mm - Weight: 475 grams (16oz)
Odyssey Aerospace Rim
$67.99
The Aerospace features an “aero” or “V-shaped” cross-section, which creates a unique structural design. Made from 6000 series aluminum, it’s both easy to manufacture, incredibly durable and allows us to create a rim that’s strong, light and affordable. Thick inner sidewalls, and a lowered center wall section provide more room when installing or removing tires, and running brakes isn’t an issue. The Aerospace uses a traditional lacing pattern, just like the HAZARD LITE, SEVEN K-A and QUADRANT. FEATURES - Precision welded joint 6000 series aluminum SPECS - Width: 34mm - Height: 23mm - ERD: 380mm - 36-hole - 450 grams (15.8oz)
Page 1 of 3 Next page