Upgrade Your Bike Components
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Replacement reservoir cap screw for Hope brakes.
- Converts Schrader rims to Presta - Rubber - Sold individually
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
- Aheadset preload adjusting bolt
M7 Shaft/M6 Head 48mm Long
$0.99 $6.99 86% Savings
The crowning touch to any cruiser wheel. - Decorative valve covers screw on to valve stem - Designed for standard Schrader valves only - Set of two, one for each wheel
- w/Nut - 1-3/4-inch
- 8x1mm Allen head
- Model: Replacement bolt - Compatibility: Allen, M5x16
$1.00 - $48.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
- Hoods with (FD) are Flight-Deck compatible
$1.00 - $5.00
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
- Replacement cable anchor bolt for brakes - Includes nut and washer
- Aluminum w/lock nut and mount - Slotted mount design
- Shell: 8mm flanged axle nut - Flanged
- Crank dust cap - Works with most three-piece crank models
- Chrome - Sold individually
- M8 Top Plate Bolt
- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
- For MTB levers - 7mm x 1mm - Aluminum construction
- Routes cables underneath the bottom bracket - Will not rust or corrode
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
• Rim valve grommet for XXX rims • Rubber
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag
- Sunlite Cottered Pins
- Rubber - Color: Black
- Standard steel replacement
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
• Replacement nut for recessed caliper brakes
Brass compression olive for Hope hydraulic disc brakes.
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
• Compatible with most side pull and center pull brakes • All weather compound
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Standard replacement star nuts for threadless steerers.
Standard replacement star nuts for threadless steerers.
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm
• MTB or Road • 1.5 x 1855mm • Galvanized
$2.79 - $6.29
Shifting cables for Road/Mountain bikes.
Replacement banjo bolt for Hayes hydraulic Brake systems.
$2.88 - $11.00
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Bar end plugs (2)
Product details - Use in chainstay pocket to seal sensor into frame
$2.99 - $9.99
- Compatible with Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Black Teflon cables are designed for ultra-low friction and corrosion-free shifts - Stainless steel and zinc galvanized steel cables are corrosion resistant
A must-have item for all your delicate department store bike repairs.
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
$2.99 - $3.99
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
Basics brake cables provide value on a budget. - Pre-stretched - double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag
Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. • Lightweight resin/alloy design
Page 1 of 78 Next page