Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Riser
$201.95
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle.
The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing.
The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed.
The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+.
Friction Paste recommended for installation
$179.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain.
- Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight
- 27.5mm high rise helps you dial in the perfect hand position
- Brake and shifter lever position lines for spot-on control setup
- 40mm of cut marks on each side for easy width customization
- OCLV Carbon construction is the benchmark for durability and light weight
$179.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain.
- Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight
- 15mm rise helps you dial in the perfect hand position
- Brake and shifter lever position lines for spot-on control setup
- 40mm of cut marks on each side for easy width customization
- OCLV Carbon construction is the benchmark for durability and light weight
$179.99
A 35mm OCLV Carbon handlebar that adds strength, saves weight, and maintains compliance on rugged MTB trails.
Pin it to win it
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversize 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain.
Product details
- Pro-level quality handlebar in oversize 35mm clamp diameter offers increased strength and minimal weight
- 15mm and 27.5mm rise options to dial in the perfect hand position
- Brake and shifter lever position lines for spot-on control set-up
- 40mm of cut marks on each side for easy width customization
- OCLV Carbon construction is the benchmark for durability and light weight
$129.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- OCLV Carbon construction is the benchmark for durability and light weight
- Shifter and brake lever position lines for spot-on control setup
- 4 degree upsweep and 9 degree backsweep optimal for XC and trail
- 40mm of cut marks on each side allow for easy width customization
$109.99 - $119.99
Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees.
- 41-Thermal Lifetime Warranty
- 1.8/1.3mm thick, multi-butted main tubing
- Butted, traditional 7/8? crossbar for strength
- Large radius bends for greater durability
- Post-weld heat-treated
$99.00 - $114.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Increased strength and stiffness compared to conventional alloy bars
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
Features
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy
- Material: MGR Super 6 Alloy
- Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm)
- Sweep: 4° up x 8° back
- Finish: Shot peen anodized, decal logos
$95.49 - $103.39
Origin-8's Classique CargoUnit is a fine 6061 T6-aluminum riser handlebar with a built-in basket. It's the answer to bolt-on baskets and bags that are often unstable. Because the basket is integrated into the bar, your gear rides on a secure, sturdy platform with room for groceries, a gym bag, and a couple burritos. The CargoUnit has a heavy-duty powder-coat finish, too.
$79.99 - $99.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you.
- Manufactured from cold drawn, 7075 Aluminium
- 35 optimized triple butted design
- Turned up to Rally control with 800mm width
- Rise sizes to for every build and preference 10/20/35mm
- Stealth black on black decals to match every frame color
$98.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$89.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted
$79.99 - $89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it?
- Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform
- Requires 35mm bar clamp diameter stem
- Full 800mm width that can be trimmed down to a minimum 750mm
- 8 degree rearward sweep, 5 degree upward sweep
$79.90 - $89.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more.
- Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy
- Material: MGR Super Six Alloy
- Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm)
- Diameter: 31.8mm
- Rise: 5mm / 15mm / 30mm / 50mm
- Length: 800mm (Adjustable to 740mm)
- Geometry: 4° up x 8° back
- Finish: Shotpeen anodized, decal logos
$69.99 - $89.99
Sunday Discovery bars feature large radius bends for greater durability.
$84.99
- AL6066-T6 tubular alloy construction
- 35mm oversized clamp diameter
- 800mm width
- 7°/8° back sweep (Depending on rise dimension)
- 5° upsweep
- ISO-Mountain safety certified
- 290-335g (Depending on rise dimension)
$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish.
- Aonodized, shot-peened finish
- Cold-drawn and butted proprietary AirAlloy aluminum tubing
- 4 degree upsweep
$75.49
- Economical 6066 aluminum alloy mountain handlebar
- 800mm width
- 3 rise options
- Back sweep: 7°
- 310-350g (Depending on rise dimension)
$69.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- Shifter and brake lever position lines for spot-on control setup
- 4 degree upsweep and 9 degree backsweep optimal for XC and trail
- 40mm of cut marks on each side allow for easy width customization
$69.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses.
Spank Spoon: the best-priced handlebar on the market without compromise!
- Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality
- Freeride inspired all-mountain geometry makes the bar extremely versatile
- Shot-peening and anodizing enhances fatigue life
- Dial your fit—adjustable to 740mm
- Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
$54.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number.
- Manufactured from cold drawn, seamless 6061 Aluminum
- Shot peened for increased fatigue life
- 35 optimized triple butted design
$29.99 - $48.49
Origin-8's MX Mini Urban Handlebar is made from lightweight, durable 6061-T6 aluminum. It provides a 75mm rise and a 600mm width, along with moto styling.
$40.00 - $48.49
Origin-8's Pro Urban Riser Handlebar is a wonderful ride companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.
$45.99
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number.
Features
- Manufactured from cold drawn, seamless 6061 Alloy.
- Butted for an optimal strength to weight ratio.
- Wider construction & re-designed taper offers
- 740mm wide
- 9° rearward, 6° upward
$39.99
The MX Handlebar offers a comfortable way to customize your bike with a bit of BMX style. The low-rise chromoly handlebar is a perfect upgrade to a Weekender Archer bike, for example. Or, put them on any bike in need of some tough chromed chromoly steel!
- 7/8" (22.2mm) BMX style clamp (so you'll need a BMX stem to use them)
- 4” rise
- 28” width
$24.99 - $37.99
Lightweight aluminum construction with a versatile riser bar design.
$35.00 - $36.99
Origin-8's Pro Urban Riser Handlebar is a wonderful city companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.
$35.99
Get back on the road with a genuine replacement handlebar.
Original replacement handlebar for your Ponto Go!
PRODUCT DETAILS
- Original equipment for Electra Ponto Go!
- Alloy construction
$35.99
- Big brother to the #869 handlebars
- These are veritable pillars of chrome
- 1"(25.4mm) clamp, 13" rise, 24.5" wide
- Handmade in Maysville, Kentucky
$31.99
Grab life by the handlebars.
- Original equipment replacement for Townie Original bikes
- 6061 alloy with an anodized finish
$25.00
Genuine replacement parts
Customize your bike with a new handlebar that fits your own personal style.
Product details
- Traditional 20 degree back sweep handlebar
- 6061-T6 polished aluminum with anodize finish
- RIDE+ versions have an integrated cable guide inside
Page 1 of 2
Next page