The only thing left to do is answer. No matter where the call beckons, the MTR can get you and your ride there. Designed with versatility at its core, the MTR (aka: modular tray rack) can transport a variety of bikes and can be easily customizable with add-on trays to bring your whole collection of shredders or ride-share with friends. Each MTR rack is built from American-made steel and aluminum for maximum durability. Roomy wheel trays swallow bike tires up to 5 inches wide for a stable hold, while dual-arm wheel holders keep bikes locked in position—and keep the paint chip-free. It’s all built on a rugged hitch-based foundation that can be tilted away, when fully loaded with bikes and without, for fast and easy vehicle access—because after all, those snacks aren’t going to pass themselves. Plus, the MTR’s nesting bike trays make for easy-on, easy-off loading. No more lifting bikes over the rack—simply flip the trays out of the way as needed to get you from parking lot to trailhead in record time. Product Features - Modular: carries 2 bikes, up to 60 lbs, and can be customized with Add-On to transport up to four bikes. - Pivot away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes, and never touch the bike's frame. - Full Tilt: tilting mechanism for easy hatch access. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Designed to be used with 2" hitch receivers only. - Tray-style hitch bike rack - Carries 2 bikes, up to 60 lb. each - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed - Rack folds up for compact storage when not in use. - Tool-free installation - Rack weight: 55 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches - Integrated locking cable secures bikes to the rack - Locking hitch pin secures rack to the car - Accommodates wheel bases up to 53 inches - 2" hitch compatible - Constructed from American-made aluminum and steel, and tested to outlive the elements
Customize Your Hauling Capacity No ride or trail is exactly alike—so why is your rack setup the same no matter what? Put the MTR’s "modular" moniker to use with the 2-bike Add-On. The 2-bike Add-On is made from the same rugged, American-made aluminum and steel, which are tested to outlive the elements. It’s compatible with both 1-bike and 2-bike models and lets you haul more bikes to fit the day’s adventure—and maybe bring some friends along for the ride. Product Features - Bike tray add-on for MTR 1-bike or 2-bike tray-style hitch rack. - Built with American-made aluminum and steel. - Nesting wheel trays speed up bike loading and unloading process. - Wheel trays and dual-arm wheel holders securely transport variety of bikes. - Hauls bikes up to 60 lb if used as first two trays closest to vehicle; or up to 35 lb if used as third or fourth tray. - Bike tray add-on for the MTR platform hitch rack. Compatible with both the 1-bike and 2-bike base. - Carries 2 bikes, up to 60 lb each when used in the first two positions closest to the vehicle. When used in positions furthest from the vehicle, trays can hold bikes up to 35 lb. - Minimal assembly required. - Rack weight: 50 lb. - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Integrated locking cable secures bikes to the rack. - Hitch compatibility will depend on MTR base unit. - Built and tested to outlive the elements.
Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base
Want all the innovations of our revolutionary Glide rack, but only need to transport a couple of rides? This 2-bike hanging hitch rack has you covered. The Glide EX 2-bike features the same noteworthy and one-handed glide action of its Glide brethren, plus a beefed-up bike spec: the ability to carry 50 lb per bike. Yep, that's right - this hanging hitch bike rack is eBike compatible. Simply push the trigger to release the rack, glide away and boom – hatch access. When you’re done, the same amount of (non) effort glides the rack upright and you’re good to go. It’s the same one-button, one-step, one-motion movement for when the hitch rack is fully loaded and when it’s not. Product Features - eBike Friendly: this hanging hitch bike rack transports 2-bikes, up to 50 lb each. - Convenient, one-step access to the back of the car - fully loaded with bikes or not. - Innovative four-bar linkage system controls the center of mass, creating a smooth, glide-action away from the vehicle. - Complete integrated security: locks the rack to the car and the bikes to the rack. - Hanging hitch style bike rack. - Carries 2 bikes, up to 50 lb. each. - One-button glide action provides instant access to rear of vehicle, both with bikes loaded and without. - No assembly needed. - Rack weight: 37 lb. - Bike hold downs are easy to use and quick to load. - Best-in-class ratchet straps speedily fasten bike to the rack. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. For use with receiver hitches Class II or higher. - Built and tested to outlive the elements.
Transport up to two bikes with the Swagman Semi 2.0 Platform Hitch Rack. The platform design requires minimal lifting to load bikes and the ratcheting arms only grab the wheels so your bikes stay secure with zero frame contact. - Integrated locking cable included - Tilts down to allow access to rear-of-vehicle even while bikes are loaded - Carries up to 2 bikes - Fits 1-1/4” and 2” hitch receiver - Fits most frame sizes, shapes, and styles - Patented design - Rear wheel ratchet strap firmly hold bikes and secure wheels - Max. load: 45 lbs. per bike
The Saris Spare Tire SuperClamp is more than just a fun tongue-twister -- it’s an excellent way to use your existing spare tire to carry your bike. Even better that the rack has no frame contact on your bike, securely holding the bike by the wheels. - Rack adjusts to fit various spare tire locations (left, right, center). - Easy to load up to 2 bikes (35 lbs/bike). - Rack does not touch the bike frame. - Rack-integrated locking cable ensure bike security. - Carries 2 bikes (35 lbs/bike). - Preassembled. - Fits all bikes. - No frame contact design. - Adjustable, locking arms. - Rack-integrated locking cable. - Ratcheting arms pivot on case hardened brackets. - Lightweight at 36 lbs.
Choose your own adventure with the MTR 1-bike hitch rack. Whether you're feeling me-time or party time, the MTR can adjust for any occasion. The secret is in the MTR’s modular design (after all, MTR stands for "Modular Tray Rack"). Simply add or remove trays to securely haul between one and three bikes to wherever the trail may lead. When you're ready to hit the road, feel free to take the scenic route. Rugged enough to handle the harshest of environments, the MTR is built with American-made steel and aluminum. Complete with versatile and sleek nesting trays with dual-arm wheel holders, the MTR can carry nearly any rig—from Junior's MTB to downhill to your favorite eBike—securely, in style and without ever coming into contact with your bike's frame. The Saris MTR also available in a 2-Bike version. Product Features - Modular: carries 1 bike, up to 60 lbs, and can be customized with Add-On to transport up to three bikes. - Pivot Away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes and never touch the bike's frame. - Full Tilt: tilting feature allows easy hatch access without removing bikes. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Tray-style hitch bike rack. - Carries 1 bike, up to 60 lb. - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed. - Tool-free installation. - Rack weight: 35 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Easily folds up when not in use. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Accommodates wheel bases up to 53 inches. - Universal hitch: fits 1-1/4" and 2" hitches out of the box. - Constructed from American-made aluminum and steel, and tested to outlive the elements.
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes
Swagman's Cross-Country Rack makes it easy to transport up to 4 bikes. Simply lift a bike into the wheel holders, secure the ratcheting arm over the frame, and strap in the wheels. The trays can be adjusted to offset the bikes for a convenient fit. The XTC rack is made of steel for excellent stability and durability, features adjustable wheel holders to fit different bike types, and the rack's center arm folds down so you can access your vehicle.
The Swagman Dispatch is an ideal RV Approved rack for those that have clearance issues on the back of their trailers; sitting 17" away from the hitch pin hole. Capable of carrying 2 bikes of 45 pounds each where you need them. - Fits: 2" Hitch Receiver, Class 3 or higher - Max Load: 45lbs. per bike - Locking hitch pin and cable included - Fits most frame sizes, shapes and styles. Use of a Bar Adapter (#64005 or #63999) required for Step Through/Cruiser style bikes - Designed for increased ground clearance - Adjustable hooks secure frame to rack - Wheel ratchet straps firmly hold bikes and secure wheels - Carries up to 2 bikes - Carrier Weight: 54 lbs - Fat wheel trays available sold separately (64694) - Ideal for an RV or a motor home - Rack Weight: 51lbs
Whether you've invited more friends for an epic ride or can’t decide which rig to take to the trails, the MTR 1-Bike Add-On has you covered. Compatible with both the MTR 1-bike and 2-bike hitch rack, these add-on trays save you the hassle of buying a new rack to haul more bikes. Built with the same robust materials as the MTR rack, these add-on trays are ready to roll out of the box and are the soul of the Modular Tray Rack (MTR) functionality. Product Features - Bike tray add-on for MTR 1-bike or 2-bike tray-style hitch rack. - Built with American-made aluminum and steel. - Nesting wheel trays speed up bike loading and unloading process. - Wheel trays and dual-arm wheel holders securely transport variety of bikes. - Hauls bikes up to 60 lb if used as first two trays closest to vehicle; or up to 35 lb if used as third or fourth tray. - Bike tray add-on for the MTR platform hitch rack. Compatible with both the 1-bike and 2-bike base. - Carries 1 bike, up to 60 lb when used in the first two positions closest to the vehicle. When used in positions furthest from the vehicle, tray can hold a bike up to 35 lb. - Minimal assembly required. - Rack weight: 30 lb. - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Integrated locking cable secures bikes to the rack. - Hitch compatibility will depend on MTR base unit. - Built and tested to outlive the elements.
Yakima's RidgeBack 2 securely transports two bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
Freedom is a versatile lightweight rack that makes loading and unloading bikes quick and easy. Foldable upright arms securely clamp top or seat tubes with soft, non-marring pads. - Ratcheting straps keep bike stable and secure and adjust to fit most bikes - Standard wheel scoop fits up to 2.25" tires. Fat wheel trays are available separately - Adjustable to work with most bikes - Fits 1 1/4- and 2-inch hitches - Can hold two bikes weighing up to 60 lbs each - Rack weighs 20 lbs - Made in the USA
Transport all types of bikes with Saris' Freedom Spare Tire 2-bike rack. Designed to fit all spare tires (left-, right-, or center-positioned), this innovative rack adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each. Loading is made easy by the low tray height. The center upright support even tilts down to stay out of the way when not in use.
Saris’ Bones RS 3-Bike rack might as well be welded to your car—it’s that rock solid. Easy to mount and dismount, the rack has two stainless steel belts that are tightened by leveraged ratchet systems. Plus, two lower leg hooks and six grippy rubber feet mean you can set it and forget it. Ratcheting anti-sway straps keep your bikes in place, the arms fold down to keep out of the way, and a locking mechanism secures the rack to your vehicle for peace of mind.
When it comes to convenience, flexibility, and ease-of-use, it's tough to beat a good hitch-mount platform bike rack. Swagman's Sitkka 2 is packed with the features that make a great platform rack, and it'll securely transport almost any bike with equal ease. - Zero frame contact rack - Fits bikes from 20" wheels up to 29"+ including fat bikes up to 5" wide - Rack folds up against the back of the vehicle when not in use - Tilts down to allow access to the rear of vehicle even while bikes are loaded - Locking ratcheting arms with replaceable keys help to prevent bike theft - Sliding rear straps accommodate bikes of various lengths - Wheel ratchet straps and pressure chocks firmly hold bikes and secure wheels - Carrier Weight: 45 lbs - Comes with threaded locking hitch pin
Swagman's Patrol pickup rack has your bikes on lockdown. This quality rack features a telescoping aluminum bar that easily adjusts to span your pickup bed. This rack comes equipped with two fork mounts and can be expanded to fit up to four bikes (additional parts sold separately). The Patrol includes 4 lock cores that lock the bikes to the rack, and the rack to the vehicle.
Swagman's most versatile and popular XTC2 bike rack, now with a tilting feature so you can access the rear of your vehicle. A great solution for carrying 1-2 bikes with the secure mounting capabilities of a platform style rack, now with a tilting feature. The XTC2 Tilt hitch-mounted bike rack comes complete with a 1-1/4" receiver bar and a 2" adapter plate, allowing it to easily fit most hitches. The foam-padded hooks help protect the bike frame while using an easily adjustable push button ratcheting system to stabilize and secure the bikes into the wheel hoops that accommodate wheels up to 2.5" wide. This lightweight, easy-to-assemble system, supports most frame sizes, folds into clamshell shape when not in use and tilts away from your vehicle. - Transports up to 2 bikes - Max Load: 35lbs per bike - Fits 20" - 29" wheel sizes - Center arm folds down to allow access to the rear of vehicle without removing the rack - Rack tilts away from the vehicle to allow access while bikes are still loaded - Locking Hitch Pin, Cable, and Fat Tire Trays sold separately - Rack Weight: 30lbs
The Bones Hitch 4-Bike rack is born out of the design and function of Saris' best-selling Bones rack and brought to life in the form of a hitch rack. You wanted a nicely designed, tilting rack at a great value, and you wanted it to be lightweight. The result is the Bones Hitch. The Bones Hitch is one of the lightest racks in the marketplace yet every bit as strong and durable. That's why Saris backs it—along with all of their racks—with a lifetime warranty. Stylish, lightweight, easy to use and made here in the USA—who says you can't have it all? - Carries 4 bikes, up to 35 pounds each. - Preassembled in box. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches out of the box. - Lifetime warranty. - Made in Madison, WI. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 20 lbs.
Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides, and expeditions in the backcountry—we took the best platform rack on the market and increased it. Integrated Cable Locks - Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack. Adjustable Tire Cradles - Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue. - Intuitive Front Tire Ratchet - Trail-Doc Compatible - Premium Matte Black Powdercoat
Swagman's Race Readu Roof Rack is simple, sturdy, and dependable—everything you want in a roof rack. The Race Readu is compatible with nearly any style or size of bike and allows you to load your bike without removing the front wheel. A ratcheting arm secures the bike by the front wheel and ratcheting straps hold both wheels in the tray. The Race Ready fits on round, square, and factory crossbars that are 2.5-inches wide or less, and even features an integrated cable lock to help keep your ride safe.
If you’re looking for a car rack that will haul your favorite 2-wheeled possessions with swagger and security, the Bones Hitch 3-bike has you covered. With arching lines and robust, American-made materials this hitch rack can be summarized in two words: beautiful simplicity. Weighing in at only 16 pounds, this 3-bike hitch rack is a full 25% lighter than similar racks—et just as strong. With integrated anti-sways and hold downs, the Bones Hitch is a fully functional piece of art. - Carries 3 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 16 pounds. - Made in Madison, WI.
What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
Secure your bikes with Saris' Kool Rack 2-Bike. Hydraulic pressure holds the rack in place while valve limits protect your truck bed walls. Its pivoting rubber pads grip most surfaces, including bedliners. No drilling is required. The Kool Rack comes with two fork mounts—additional mounts can be added (sold separately). Besides holding bikes, the Kool Rack can be used to secure cargo from sliding around the pick-up bed.
Hollywood's Spare Tire "Bolt On" Rack attaches to the spare tire’s mounting bolts with universal adapter plate. Fully adjustable to fit most spare tires, this rack’s support arms can be centered for side-mounted tires and folded when not in use. Soft rubber cradles carry up to two bikes, an integrated safety strap ensures safe bike transport, and a lock secures the rack to your vehicle. - Distance between bike support arms: 13 inches - Distance between bike cradles: 7 inches - Maximum tire width: 12 inches - Two bike capacity (35 lbs per bike)
A modern two-bike tray rack utilizing an easy to load platform. Wide wheel trays and high quality ratchet straps securely hold two bikes. Put Your Bikes On. Go Play. Finally, a modern 2-bike tray rack that's as intuitive as it is affordable. Featuring adjustable arms capable of carrying a wide array of bike styles and sizes, the All Star securely transports two bikes, up to 45 pounds each—that's 90 pounds total! Plus, the combination of the All Star's easy to load platform, wide wheel trays and high-quality ratchet straps means fast and secure loading, so you can focus on riding your bike. As for hatch access? Not a problem. Just unload your bikes and fold down the All Star's mast to grab that "one last thing." And like all Saris racks, the All Star hitch rack is made in the USA and is backed with a lifetime warranty. Product Features - Carries 2 bikes, up to 45 pounds each - Easy-to-load platform and wide wheel trays cut down on bike loading time - Adjustable arms securely transport a variety of bike sizes and styles - Mast folds down to provide hatch access when not loaded with bikes Product Design - Tray style hitch rack - Universal hitch works with 1-1/4" and 2" hitch receivers - Wheel trays adjust to hold variety of bike sizes and frame types - Ratcheting wheel strap securely holds tires up to 3" - Adjustable arm and padded hooks secures bike frame - Center arm folds down for access to rear of vehicle when not loaded with bikes - Rack weight: 21lb
Thule's 4-Bike Parkway rack features 2 sturdy arms with Thule's stable, protective cradles to safely carry and secure your precious two-wheel cargo. Plus, the Parkway easily tilts down for access to the back of your vehicle.
Yakima's BikerBar is a complete tool-free bike carrying system for your pickup truck. It installs and removes easily with the included Yakima BedRock quick releases and comes with a round bar and two locking Boa bike mounts. Available in two sizes, it fits most common mid- and full-size trucks.
A Leg Above the Rest The Bones trunk rack made a name for itself in the mid-90's, and 25 years later it's doing it again. How? By expanding its vehicle compatibility to fit 20% more of the most popular vehicles, including those with spoilers. Featuring a unique arched leg, the Bones EX gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs. This simple, yet game-changing design by Fabio Pedrini transformed the iconic trunk rack into one that could fit 90% of the top 50 vehicles sold in the USA. Equipped with premium bike hold downs and a streamlined strap management system, the Bones EX is penning its own chapter in history books. And just like its legendary predecessor, the Bones EX is made in Madison, Wisconsin, USA, with locally sourced materials that'll last a lifetime. Features - Carries 2 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
Page 1 of 3 Next page