Trailers/Strollers

Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side axle nut and once it's in place, the Burley hitch is installed to the adapter.

Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side axle nut and once it's in place, the Burley hitch is installed to the adapter.

Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side quick-release nut and once it's in place, the Burley hitch is installed to the adapter.

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

The Burley Ballz Nutted Axle Adapter includes a set of threaded Ballz that replace the nuts on your current nutted axle, enabling compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with nutted axles. - Official Burley Ballz adapter for bikes with nutted axles - Two Burley Ballz that thread onto the existing nutted axle - Quick and easy one-time installation - Specially designed for use with the Coho XC

Replacement safety flag for extra visibility.

Burley's Flex Connector joins the trailer to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily letting you lay down the bike. Includes safety strap and retaining pin.

The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop

Enables connection of the Coho XC trailer to bikes with QR skewers. These QR skewers replace the existing QR skewer on your bike to enable compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with QR skewers. The standard version of this skewer is included with the Coho XC out of the box. - Easily replace your rear QR skewer to attach the Coho XC - Quick and easy installation - Specially designed for use with the Coho XC

Enables connection of the Coho XC trailer to bikes with QR skewers. These QR skewers replace the existing QR skewer on your bike to enable compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with QR skewers. The standard version of this skewer is included with the Coho XC out of the box. - Easily replace your rear QR skewer to attach the Coho XC - Quick and easy installation - Specially designed for use with the Coho XC

Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.

Have fun, rinse, and repeat! The Burley Floor Mat catches all the dirt, sand, snacks, and mud for easy clean-up. - Easy removal for a quick clean-up

The Premium Seat Pad provides cushioning with an adjustable headrest to keep your little one comfortable and supported. The hand-washable padding is easily removed for cleaning. - Seat and shoulder strap padding - Headrest for added support - Removable and hand-washable - Includes: Seat Padding, Shoulder Strap Padding, & Headrest - Compatible with 2016-Current child trailers

Burley’s official adapter for bikes with a 12mm thru axle. Stock thru axles are not able to accommodate any sort of axle mounted hitch system. The Burley Thru Axle is a requirement for any axle mounted hitch system with a bike that has a 12mm thru axle. Burley's new Thru Axles have an external male threading on the end to accommodate the installation of our axle mounted hitch system.

A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC

The Coho Pannier Rack allows for the attachment of panniers to the fender of the Coho XC. The 10mm bar allows for use with many different types of panniers. Pair the Coho Pannier Rack with the Burley Pannier Set for even more carrying capacity on your Coho XC. - Specially designed for use with the Burley Coho XC - Easy installation - Compact form factor

Stay organized while you’re on the go with the Burley Handlebar Console. The perfect compartmentalized space while jogging or strolling keeps everything you need within reach. Includes space for water bottle or coffee, wallet, keys, & cell phones—or for any need that arises. - Two cup holders - Large center compartment - Interior mesh zip pocket for smaller items - Clear top pocket for easy hands-free viewing - Quiet magnetic lid closure - Attaches using Velcro straps

Giant Cyclotron Indoor Trainer Mat is the perfect noise reducing floor protection solution for indoor Winter training. Features - Rubberized material for easy rinse off after your workout - Pebbled’ surface, anti-skid and scratch-resistant material protects flooring while working out - Extra-large 3’ x 6’ (91.5cm x 183cm) size covers entire workout area, prevents perspiration from getting on carpets or wood floors - Comes rolled-up in draw-string, mesh carry bag with shoulder strap

Soft and snuggly, the Baby Snuggler keeps your littlest traveler comfortable and secure when jogging, strolling, or biking. Recommended for children 6-24 months of age. Child should be at least one year old before biking in trailer (child must be able to sit upright unattended and hold his or her head up while wearing a bicycle helmet). For children less than one year old it is recommended to only use the Snuggler for strolling and jogging.

The Coho 16+ Wheel Kit sports a 16 x 3-inch knobby tire, offering superior handling on unpaved surfaces including gravel, sand, and snow. Now, nothing can stop the Coho XC from coming along for the ride. A wide range of acceptable tire pressure lets you adjust the stiffness to your liking. Let a little air out and the tires soak up the bumps. - Specially designed for the Coho XC - Aluminum rim & hub - Stainless steel spokes - Knobby tread for superior handling - Quick release wheel

Classic roll-top design and heat-sealed seams make this spacious 75-liter dry bag totally waterproof. Constructed with 500D tarpaulin fabric that is both tough and lightweight. Includes shoulder strap and carry handles. - Capacity: 75 liters - Weight 2.62 lbs. - Shoulder strap and carry handle - Designed for Burley Coho XC and Flatbed bike trailers

Burley's Nomad Cargo Rack is made of lightweight, sturdy aluminum and mounts easily to your Nomad trailer (sold separately) so you can expand your carrying capacity and haul even more stuff on your journeys. Now there's no excuse to leave anything home!

Two roll-top, waterproof panniers keep gear dry and organized. Compatible with all 10mm rack bars and have a combined capacity of 22 liters. Bright colors and reflective patches provide increased visibility. Constructed with 500D waterproof tarpaulin with heat-sealed seams. - Waterproof - Compatible with 10mm rack bars - Large reflective patches - Easy-to-use carry handle - Combined weight: 2.09 lbs.

Take your Burley all over town with the 2-Wheel Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. Leveling springs keep the stroller grounded on uneven terrain. Get out and explore with added versatility. - Easy conversion from biking to strolling - Fully pivoting wheels provide optimal maneuverability - Wheels easily slide into the trailer mounts - Includes: 8-inch Stroller Wheels (2) & Wrist Tether - Compatible with: 2019 – D’Lite X, 2019 – D’Lite Single, 2019 – Cub X, 2019 – Encore X, 2007-Current – D’Lite, 2007-Current – Encore, 2007-2018 – Solo, & 2010-2018 – Cub

Burley's Stroller Kit easily converts Burley's child and pet trailers into strollers, making it possible to walk and jog with them. It includes a stroller wheel that folds up for convenience as well as a parking brake and wrist tether for security. • Stroller wheel stays attached and folds up out of the way when cycling • Tool-free adjustment makes switching from bike to stroll mode simple • Adjustable tracking makes for consistent, easy rolling • Burley's easy-glide tow bar retracts closer to the trailer for easy maneuverability • Stroller wheel pushes easily Compatible with: 2007-Current D'Lite 2007-Current Encore 2007-Current Solo 2007-Current Cub 2007-Current Honey Bee 2008-Current Tail Wagon

Take your furry friend all over town with the Tail Wagon Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. - Tool-free installation - Stroller wheels push easily - Compact footprint for maneuverability in tight spaces - Compatible with 2008 – current Tail Wagon models

Convert your Burley into a jogging stroller. It's the perfect way to expand the capabilities converting the trailer to a jogger. Tracking adjustment fine tunes the orientation of the front wheel. It's the perfect accessory for any family on the run.

Don’t let your adventures be limited to the pavement. The 16+ Wheel Kit improves handling over snow, sand and gravel. The kit includes two 16x3” push button wheels with a knobby tread. A wide range of acceptable tire pressures let you adjust the stiffness to your liking. Let a little air out and the tires soak up the bumps for your passengers. Say goodbye to the sidewalk. Constructed with aluminum rim/hub and stainless steel spokes.

With versatility like a pickup truck, but none of the gas, Burley's Flatbed trailer will change the way you approach errands. This 14-pound cargo trailer is made from light aluminum and can hold a full 100 pounds of whatever you need to haul around. The tough PCV Skin material stands up to 2x4s and furniture without adding weight. The foldable design and quick-release wheels make it easy to store when not in use, and it uses the same hitch as Burley's child trailers, making it simple to swap from trailer to trailer.

The Burley Minnow is a single seat kids bike trailer. Upholding the Burley Standard for safety, the Minnow has: a full aluminum roll cage, 5-point harness system and passes rigorous Burley Standard durability testing. It has a comfortable hammock style seat, fold flat design, water-resistant cover, and large cargo area. The Minnow is a bike only trailer. If you are looking for a quality trailer with all the essentials the Minnow is for you. - Seating for one child - Compact fold flattens the trailer for easy storage and transportation - 20” push button wheels for quick removal - Spacious rear cargo area - Tinted side windows - Recessed helmet pocket for extra head room - Hammock style seat provides passive suspension for rider comfort